Thicker trunks with free-hanging ends

1

Start by cutting about 1/4 of the diameter of the trunk on the side you are standing. Lean slightly forwards and stand a bit to the side of the cut.

2

Now cut about 1/3 of the trunk diameter from the bottom.

3

Lean over the trunk and cut about 1/4 of the diameter from the opposite side.

4

Finally, saw the overcut from the top down until the trunk breaks or you reach the corresponding cut from the bottom.

Illustrations Wwc part 2

Safety first! Pay close attention to how the trunk is reacting at all times.

Last edited

December 14, 2022

Comments on this topic?

Contact us

Bookmark & Share

Page index