Risk for jamming the saw

Where you risk jamming the saw by a falling log end, use one of these methods:

Method 1

Both saw cuts (or only the undercut) are made at a slight angle. Start with the top cut down to about 1/3 of the diameter and then continue with the bottom cut. This allows the log to fall – and the saw is set free.

Illustrations Wwc part 2

Method 2

The saw cuts are slightly separated. Start with the top cut down to about 1/3 of the diameter and then continue with the bottom cut. This allows the log to fall – and the saw is set free.

Illustrations Wwc part 2

Last edited

December 12, 2022

Comments on this topic?

Contact us

Bookmark & Share

Page index